CANChecked Thermocouple Converter to CAN

Description The TCCXX are the big siblings of our TCC01 . However, the significant difference lies in the data transmission. While the TCC01 outputs an analog 0-5 volt voltage, the TCCXX send their measured values ​​to the CAN bus. Our TCCXX comes in four different sizes and designs and all sample at an adjustable frequency of up to 100 Hz: TCC04 – quadruple Type-K on CAN Dimensions TCC04 TCC06 – six-fold Type-K on CAN Dimensions TCC06 TCC08 – eight-fold Type-K on CAN Dimensions TCC08 TCC10 – tenfold Type-K on CAN Dimensions TCC10 These allow you to connect up to ten Type-K thermocouples and send the measured values ​​via CAN bus and/or monitor them directly on your WLAN-enabled device. Type-K thermocouples are suitable for various applications such as measuring exhaust gas temperature (AGT), temperatures before/after the intercooler, cylinder head temperatures, water temperature, oil temperature and more. All measurements are cold junction compensated with a measuring range of 0 to 1250°C in 0.25°C resolution (14bit). The TCCXX have a four-pin DTM connection for CAN/power and miniature K sockets. The CAN 2.0A/B standard is supported with flexible configuration. This means your next EGT to CAN module is compatible with many devices from other manufacturers. The highlight is the WLAN connectivity, which you can use to configure and update your module via smartphone or PC and query the current temperature and thermocouple status. configuration The devices can be configured via WLAN: Can Speed: 125kbps, 250kbps, 500kbps, 1Mbps Emulation: Standard, Motec,haltech, Ecumaster, AEMnet Change of standard Can Bus Id Big/Little Endian change We also support the following control devices: Emtron MaxxECU Motec Holding technology Ecumaster (black/classic) LinkECU and many more Downloads TCCXX DBC File TCCXX TRI File (CANchecked Displays) TCCXX Quickstart Guide