Subaru GC8 APP Bracket

Description The Subaru CG8 APP bracket is used for mounting a late model WRX accelerator pedal onto a GC8 or RS Liberty for your Drive by Wire conversion. CAD modeled and CNC Machined from 6060 aluminum ensures perfect accelerator pedal placement with this bracket. Includes two bolts for mounting pedal to bracket. Use existing hardware from standard accelerator pedal to mount bracket to chassis. Machined from 3mm 6060 aluminum. Lifetime warranty for the bracket   Wiring and Connectors This bracket is to suit Subaru pedals with the part number 36010AG120 (or equivalent). This part is generally found in the following models (check photos and ensure the bolt holes are on the correct side and that it has the plastic housing): – 2008-2014 Impreza, including WRX and STI models – 2008-2011 Forester -2007-2014 Liberty/Legacy The connector on this pedal assembly is the Sumitomo TS025-6S-2 6-Way Connector. Connector Pinout: 1 2 3 4 5 6 5V (sub) Sensor Ground (sub) Signal (sub) 5V (main) Sensor Ground (main) Signal (main) Pinout taken from a 2011 Subaru Impreza   When doing this conversion, a Subaru DBW Throttle body is generally used. The Subaru DBW Throttles use a  Yazaki 090II-6S-1 6-Way Connector. Connector Pinout: 1 2 3 4 5 6 Throttle Motor ( ) Throttle Motor (-) Sensor Ground Signal (sub) Signal (main) 5V Pinout taken from a 2011 Subaru Impreza Pinouts are using the Subaru Factory Service Manual style of pinout, with the locking tab at the top looking into the front of the connector. Drive by Wire Pedal Adapter Bracket Subaru accelerator pedal bracket Subaru Drive by Wire Conversion