Description Emulates behavior of Haltech IO 12 box. 4x Digital pulsed outputs (200ma Limit) 4x 0v – 5v Analog inputs 4x Digital Inputs (on – off state only) Change from IO Box A or B by jumping pin A5 to ground or not. There are limitations with this nano board: – 200mA limit for the outputs. – No frequency drive for the outputs. State or PWM only. (490hz or 980hz) – 0v-5v on the AVI only, no input protection, no 12v input to AVI or DPI pins -DPIs are state only (on or off), No Frequency measurements. Pull to ground. Will come with an Arduino Nano with the code loaded on and tested. Will come with 4 and 5 pin connectors and terminals. Code for this project is on our gitHub – https://github.com/ptmotorsport/IObox-emulator-haltech
